Hubbardton-forge 207675 Manual de usuario descargar pdf

Installation Instructions B283

Cavaletti Sconce 20-7675 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

28092

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud (2)

C Knurled Balls (2)

D Fixture Assembly

E Ground Screw

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten

the crossbar (A) to the electric box making sure

that fixture mounting holes are level.

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing

screws for use with the new fixture.

3. Thread studs (B) into the appropriate holes in the

crossbar (A). Adjust the studs to proper length to

ensure the fixture will fit snugly to the wall.

4. Hold the fixture assembly (D) close to the wall

and using suitable wire connectors, (not

provided), connect fixture wires to supply (white

to white or ribbed and black to black or smooth).

Run a pigtail lead from the crossbar ground screw

(E) and connect all ground wires (bare copper or

green to bare copper or green).

Caution: Make sure wire connectors are twisted

on securely, and no bare wire is exposed.

5. Slide fixture assembly (D) over threaded studs

(B) and push firmly to wall, making sure that no

wires are pinched between fixture back and wall.

Fasten with knurled balls (C). Be sure threaded

studs (B) are fully seated in the knurled balls (C).

6. See instructions on next page to install shade.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B283 1
28092 1

Indice de contenidos

Pagina 1 - 28092

Installation Instructions B283 Cavaletti Sconce 20-7675 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Rout

Pagina 2

Installation Instructions B283 Cavaletti Sconce 20-7675 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Rout

Comentarios a estos manuales

Sin comentarios

Hubbardton-forge 207675 Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Hubbardton-forge 207675. Hubbardton Forge 207675 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Hubbardton-forge 207675