Hubbardton-forge 213256 Manual de usuario descargar pdf

Installation Instructions B228

Tapered Angle Sconce 21-3255 & 21-3256 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26784

Caution: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all applications. If

installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Install Back plate (Figure 1)

Component Parts

A Cross Bar

B Threaded Studs (2)

C Ground Screw

D Fixture Assembly

E Barrel Knobs (2)

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided),

fasten the crossbar (A) to the electric box (see

illustration), making sure that fixture

mounting holes are level.

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing

screws for use with the new fixture.

3. Thread studs (B) into appropriate holes in

crossbar (A). Adjust the studs to proper length

to ensure the fixture assembly (D) will fit

snugly against the wall.

4. Using suitable wire connectors (not provided)

connect fixture wires to supply wires (white to

white and black to black). Run a pigtail lead

from crossbar ground screw (C) to the

junction box and connect all ground wires

(bare copper or green to bare copper or green).

Caution: Make sure wire connectors are

twisted on securely, and no bare wire is

exposed.

5. Slide fixture assembly (D) over the threaded

studs (B) and push firmly against the wall

making sure that no wires are pinched

between back plate and wall. Fasten with

barrel knobs (E). Be sure that threaded studs

(B) are seated in the barrel knobs (E).

6. Install bulb and decorative face plates (see instructions below).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B228 1
26784 1

Indice de contenidos

Pagina 1 - 26784

Installation Instructions B228 Tapered Angle Sconce 21-3255 & 21-3256 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. B

Pagina 2

Installation Instructions B228 Tapered Angle Sconce 21-3255 & 21-3256 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. B

Comentarios a estos manuales

Sin comentarios

Hubbardton-forge 213256 Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Hubbardton-forge 213256. Hubbardton Forge 213256 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Hubbardton-forge 213256