Hubbardton-forge 365610 Manual de usuario descargar pdf

Installation Instructions A192

For Meridian Chain-Hung Fixture 36-5610 & 36-5610F Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22418

To Install Fixture (Figure 1)

Component Parts

A Lock Nut

B Crossbar

C Cupped Washer

D Ground Screw

E Threaded Stud (2)

F Nipple

G Wood Screws (4)

H Canopy

I Canopy Loop

J Cover Plate

K Knurl Ball (2)

L Chain

M Fixture Loop

N Fixture Top

Caution: Be sure power is off at the main breaker box prior to installation

1. Carefully unpack the fixture from the carton.

2. Thread studs (E) through appropriate holes in crossbar (B) to match

holes in canopy (H).

3. Thread the nipple (F) into the crossbar (B) and secure with lock nut (A).

4. Thread canopy loop (I) onto nipple (F).

5. Attach one end of the chain (L) to the fixture loop (M). Lace the wire

through every other link of the chain (L) to the end.

6. Slide cover plate (J) and canopy (H) over chain (L) until they rest

against fixture top (N).

7. Fasten the chain (L) to the canopy loop (I) and slip wires through the

canopy loop (I) and nipple (F). Make sure to provide enough slack in

the wire to ensure weight of fixture is supported by the chain.

8. Raise fixture to ceiling and using at least two wood screws (G) attach

cross bar (B) to a structural member in the ceiling, centering the

crossbar over the outlet box. We've supplied wood screws with your

fixture; however, different materials and/or construction methods may

require different fasteners. If in doubt, contact a qualified electrician. Do

not attach crossbar directly to outlet box.

9. Using suitable wire connectors (not provided) connect fixture wires to

supply wires (white to ribbed side of the fixture cord, black to smooth

side). Connect all ground wires to cupped washer (C) and ground screw

(D).

Caution: Make sure wire connectors are twisted on securely, and

no bare wire is exposed.

10. Slide canopy (H) and cover plate (J) over threaded studs (E) and push

firmly to ceiling, making sure that no wires are pinched between fixture

canopy and ceiling. Fasten with knurled balls (K). Be sure studs (E) are

fully seated in the knurled balls (K).

11. Install glass (see instructions on next page).

(continued)

(Figure 1)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

1 2

A192 1
22418 1

Indice de contenidos

Pagina 1 - 22418

Installation Instructions A192 For Meridian Chain-Hung Fixture 36-5610 & 36-5610F Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accesso

Pagina 2

Installation Instructions A192 For Meridian Chain-Hung Fixture 36-5610 & 36-5610F Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accesso

Comentarios a estos manuales

Sin comentarios

Hubbardton-forge 365610 Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Hubbardton-forge 365610. Hubbardton Forge 365610 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Hubbardton-forge 365610