Hubbardton-forge 217510 Manual de usuario descargar pdf

Installation Instructions B176

For Aperture Sconce 21-7510 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22736 Rev A

Please Note: This fixture is designed to be mounted on a standard wall surface and

may not be suitable for all applications. If installing in a non-wood frame application,

we recommend consulting a qualified builder or electrician.

Please Note: After installation extra hardware and accessories are possible; our kits

are used on multiple products and options.

To Mount Fixture to Wall (Figures 1 & 2)

Component Parts

A Fixture Back

B Fixture Front

C Locking Screw

D Cap Screw (2)

E Screw Cap

F Nipple

G Lock Nut

H Crossbar

I Ground Screw

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Remove fixture front (B) from fixture back (A) by loosening locking

screw (C).

Note: It is not necessary to remove locking screw (C). Two

assemblies are shipped together.

Slide fixture front (B) up to allow it to slip

over cap screws (D). Set aside for later use.

3. Using two machine screws (not provided) attach cross bar (H) to the electric

box.

Note: A new electric box comes with screws. When replacing a fixture,

retain the screws for use with the new fixture.

4. Thread the nipple (F) into the crossbar and secure

with lock nut (G). Adjust the nipple to proper length

to ensure the fixture will fit snugly to the wall.

5. Using suitable wire connectors (not provided),

connect the fixture wires to the supply wires, (white

to white, black to black, bare copper or green to bare

copper or green). If the fixture is wired with twin lead

lamp cord, connect the ribbed side to white, and the

smooth side to black.

Caution: Make sure wire connectors are twisted on

securely and no bare wires are exposed.

6. Carefully tuck all wires behind the fixture, place

fixture firmly against the wall and fasten screw

cap (E).

7. See instructions following to complete install.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

ure 1

Figure 2

1 2 3

22736 Rev A 1
22736 Rev A 2

Indice de contenidos

Pagina 1 - 22736 Rev A

Installation Instructions B176 For Aperture Sconce 21-7510 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Rout

Pagina 2 - 22736 Rev A

Installation Instructions B176 For Aperture Sconce 21-7510 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Rout

Pagina 3

Installation Instructions B176 For Aperture Sconce 21-7510 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Rout

Comentarios a estos manuales

Sin comentarios

Hubbardton-forge 217510 Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Hubbardton-forge 217510. Hubbardton Forge 217510 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Hubbardton-forge 217510