Hubbardton-forge 217520 Manual de usuario descargar pdf

Installation Instructions B178

For Aperture Vertical Sconce 21-7520 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22738

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Please Note: After installation extra hardware and accessories are possible due to our kits are used on multiple products

and options.

To Mount Fixture to Wall (Figures 1 & 2)

Component Parts

A Fixture Back

B Fixture Front

C Locking Screw

D Cap Screw (2)

E Screw Cap

F Nipple

G Lock Nut

H Crossbar

I Ground Screw

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Remove fixture front (B) from fixture back (A) by loosening locking screw (C). Two

assemblies are shipped together. Slide fixture front (B) up to allow it to slip over

cap screws (D). Set aside for later use.

3. Using two machine screws (not provided) attach cross bar (H) to the electric box.

Note: A new electric box comes with screws. When replacing a fixture, retain the

screws for use with the new fixture.

4. Thread the nipple (F) into the crossbar (H) and secure with lock nut (G).

Adjust the nipple to proper length to ensure the fixture will fit snugly to

the wall.

5. Using suitable wire connectors (not provided), connect the fixture wires

to the supply wires, (white to white, black to black, bare copper or green

to bare copper or green). Ground the crossbar using the green ground

screw (I) and securing a pigtail lead to the crossbar. If the fixture is

wired with twin lead lamp cord, connect the ribbed side to white, and the

smooth side to black. Caution: Make sure wire connectors are twisted

on securely and no bare wires are exposed.

6. Carefully tuck all wires behind the fixture back (A), place fixture back

firmly against the wall and fasten with screw cap (E).

7. See instructions following to complete install.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

Figure 1

Figure 2

1 2

22738 1

Indice de contenidos

Pagina 1 - 22738

Installation Instructions B178 For Aperture Vertical Sconce 21-7520 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827,

Pagina 2

Installation Instructions B178 For Aperture Vertical Sconce 21-7520 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827,

Comentarios a estos manuales

Sin comentarios

Hubbardton-forge 217520 Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Hubbardton-forge 217520. Hubbardton Forge 217520 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Hubbardton-forge 217520