Hubbardton-forge 206730D Manual de usuario descargar pdf

HUBBARDTONFORGE.COM

-, -   

154 RT. 30 SOUTH

•

CASTLETON, VERMONT 05735

28862

Installation Instructions

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.

We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.

Please Note: This fixture is designed to be mounted on a standard wall

surface and may not be suitable for all applications. If installing in a non-

wood frame application, we recommend consulting a qualified builder

or electrician.

To Mount Fixture to Wall & Install Glass (Figure 1)

Component Parts

A Glass F Ground Screw

B Top Adjusting Nut G Mounting Screw (2)

C Bent Bracket (top) H Bottom Adjusting Nut

D Textured Bar I Bent Bracket (bottom)

E Crossbar J Support Bar

CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX

PRIOR TO INSTALLATION.

1. Carefully unpack the xture from the carton.

2. Using two machine screws (not provided), fasten the

crossbar (E) to the electric box making sure that xture

mounting holes are level.

Note: A new electric box comes with screws. When replacing a

xture, retain the existing screws for use with the new xture.

3. Hold the xture assembly close to the wall and using

suitable wire connectors, not provided, connect xture wires

to supply (whites to whites and blacks to blacks). Run a

pigtail lead from crossbar ground screw (F) to the junction

box and connect all ground wires (bare copper or green to

bare copper or green).

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON

SECURELY, AND NO BARE WIRE IS EXPOSED.

4. Push xture assembly rmly to wall, making sure that no

wires are pinched between xture back and wall. Fasten

xture assembly to Crossbar (E) with mounting screws (G)

until the xture is tight against the wall.

5. Orient the two bent brackets (C & I) to a horizontal position.

B301

Forged Vertical Bar, LED 206729D & 206730D

Page 1 of 2

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND

PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with

applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

(Figure 1)

(Continued)

1 2

Installation Instructions 1

Indice de contenidos

Pagina 1 - Installation Instructions

Pagina 2

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product. We hope you en

Modelos relacionados 206729D

Comentarios a estos manuales

Sin comentarios

Hubbardton-forge 206730D Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Hubbardton-forge 206730D. Hubbardton Forge 206730D User Manual Manual de usuario

Indice de contenidos

Modelos relacionados 206729D

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Hubbardton-forge 206730D