Hubbardton-forge 18825 Manual de usuario descargar pdf

Assembly & Installation Instructions A226

For Single Ellipse Pendants 18-825 & 18-825F Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

23909

Please Note: Pendant 18-820 shown in illustrations.

Stem Assembly

(Figure 1)

Component Parts

A Fixture Pipe

B Fixture Coupling

1. Carefully unpack the fixture from the carton.

2. Carefully thread fixture pipe (A), threaded end first, over fixture wires.

3. Apply a drop of the supplied thread locking compound to the internal

threads of fixture coupling (B) and screw stem into fixture, being careful

not to twist or pinch the wires.

Note: Application of the thread locking compound is necessary to prevent

the stem from loosening during regular maintenance and cleaning of the

fixture. Be certain to apply the compound.

4. See instructions below to complete the installation.

Assemble Canopy

(Figure 2)

Component Parts

C Hex Nut

D Lock Washer

E Canopy

F Nipple

1. Insert nipple (F) in swivel up through hole in canopy (E).

2. Place lock washer (D) and nut (C) onto the nipple (G) in swivel and

tighten securely.

Note: If installing on a sloped ceiling, make certain that the notch in

the swivel portion of the stem is oriented toward the downward side of

the slope.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

1 2 3

A226 1
23909 1

Indice de contenidos

Pagina 1 - 23909

Assembly & Installation Instructions A226 For Single Ellipse Pendants 18-825 & 18-825F Page 1 of 3 Hand-Forged, Vermont-Made Lightin

Pagina 2

Assembly & Installation Instructions A226 For Single Ellipse Pendants 18-825 & 18-825F Page 2 of 3 Hand-Forged, Vermont-Made Lightin

Pagina 3

Assembly & Installation Instructions A226 For Single Ellipse Pendants 18-825 & 18-825F Page 3 of 3 Hand-Forged, Vermont-Made Lightin

Comentarios a estos manuales

Sin comentarios

Hubbardton-forge 18825 Manual de usuario

Busca en linea o descarga Manual de usuario para Encendiendo Hubbardton-forge 18825. Hubbardton Forge 18825 User Manual Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Encendiendo Hubbardton-forge 18825